In metalwork safety and precaution is something that you cannot run away from. You just have to have protective gear. More importantly, you need to have the right tools like a plasma cutter to enhance the cutting needs of any type of metal including the hard ones. There are several steps that you have to take to make sure that you accurately use a plasma cutter. Here are the steps.
Choose the most appropriate workstation
When you need to have the straight cutting the ground, as well as the work station, must meet come conditions that prevent unnecessary accidents. You need to ground clamp and cable of plasma cutter just to make sure that it has the right grip. At this stage, you need to have a grate that acts as a perfect metalwork table since it has less friction. See bestweldinghelmet.review/
Connect to a power source
This is an electrical appliance that gets its power from the electric grid. You must connect the plug to the socket and switch it on. There is a power light that indicates whether current is flowing or not. At this point, you also need to understand the input and output power voltage in line with the power consumption of the machine.
Pressurize the compressor to the plasma cutter
This is a machine that uses a compressor to exert the high pressure such that all the fittings and the workings are in line with the functionality. At this point, you need to connect to the air compressor t get the external air. This means that you have to align the male and female connectors to complete the circuit.
Connect the ground clamp
This is the time you now get the metal that needs to be cut and grip it to the plasma cutter such that it is in line with the blade; that is the specific part that you need the plasma cutter to work on the metal.
Set the power current
Different machines have different current levels, all of them are indicated at the power plug. This is a knob that is always red and has all indicators. When you put a low current then the cutting speed is compromised or rather the machine may fail to work at all. In case you also put more current that the required one there is a possibility that you will blow up the machine.
It is time to cut the metal
Most plasma cutters have a trigger that activates the blade to run the cutting functions. You only need to press and depress to cut and stop cutting respectively. The nozzles which act as the cutter needs to be as close as possible to the metal to prevent poor cutting finishes.
Detach the ground clamp, disconnect air compressor and recoil the nozzles
This is the last stage in the cutting process. As much as you have completed the cutting process, Proper storage is important for safety and precaution.
As much as this is the standard way of the use of a plasma cutter, you need to get the manual of your specific type of plasma cutter and follow the manufacturer’s instructions for maximum benefits.